Screen size 80"
Abbreviated model name 80PE75
Native resolution SXGA+(1400 x 1050 Pixels)
Accessibility Rear
Technology DLP™ technology(0.95" DLP™ 1 chip)/DarkChip3™/BrilliantColor™(*1)
Brightness Bright mode 450cd/m2(Typ.)
Normal mode 370cd/m2(Typ.)
Eco mode 280cd/m2(Typ.)
Viewability angle Horizontal 1/2 gain: ±35Degree, 1/10 gain: ±57Degree
Vertical 1/2 gain: ±10Degree, 1/10 gain: ±28Degree
Contrast ratio 1600:1(typ.)
Screen to screen gap Horizontal 0.2-3.0mm(*2)
Vertical
Light source   LED(RGB)
Expected lifetime
(*3)
80,000hrs(*3)
Key parts lifetime
(Average)
DLPP™ chip 100,000hrs (MTBF 650,000hrs)
Cooling fan 100,000hrs
Control signal input RS-232C: D-sub 9 pins
LAN: RJ45(10BASE-T/100BASE-TX)
D-sub 9 pins×2(IN/OUT)
Mitsubishi Electric original control link
Wire remote: F3.5Jack
IR receiver
Input board slot for optional input board x3
Power consumption
(with 1 input board)
Bright mode 210W(typ.)
Normal mode 160W(typ.)
Eco mode 120W(typ.)
AC input voltage AC 100-240V±10%, 50/60Hz±1Hz
Rated current 3.2/1.3Amp.
Operation
environment
Temperature 10-35℃
(50-95℉)
Humidity 20%-80% non-condensing
Weight 140kg/309lbs
Model number Projection engine VS-PE75U
Cabinet S-8070CA
Screen unit SC-8075U
 
Abbreviated model name with Cross Lenticular Screen 80PE75L
Model number for Cross Lenticular Screen SC-8075L
Brightness with
optional Cross Lenticular Screen
Bright mode 230cd/m²(Typ.)
Normal mode 190cd/m²(Typ.)
Eco mode 140cd/m²(Typ.)
Viewability angle with
optional Cross Lenticular Screen
Horizontal 1/2 gain: ±35Degree, 1/10 gain: ±57Degree
Vertical 1/2 gain: ±33Degree, 1/10 gain: ±55Degree
 
Abbreviated model name with Black Bead Screen 80PE75B
Model number for Black Bead Screen SC-8070B
Brightness with
optional Black Bead Screen
Bright mode 110cd/m²(Typ.)
Normal mode 90cd/m²(Typ.)
Eco mode 60cd/m²(Typ.)
Viewability angle with
optional Black Bead Screen
Horizontal 1/2 gain: ±35Degree, 1/10 gain: ±75Degree
Vertical
  • (*1) DLP™, DarkChip3™ and BrilliantColor™ are trademarks of Texas Instruments.
  • (*2) Depending on configuration and environment. The maximum screen to screen gap size is recommended for large display walls to allow for screen expansions due to heat and humidity.
  • (*3) The lifetime of LED light source is an expected value, not guaranteed. The expected lifetime: Temperature condition at operation is 77°F/25°C. With 95°F/35°C, LED lifetime with Bright Mode is 60,000hrs.
  • * This product is "class 2" LED product.
page top